Eppendorf epBlue with MultiCon Manual de usuario Pagina 31
- Pagina / 180
- Tabla de contenidos
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
epBlue Application Runner - Carrying out the application
epBlue™ with MultiCon
English (EN)
31
4.2.7 Entering the filling level of the labware
4.2.7.1 Checking the filling level automatically
If the Detect volumes function is active, the optical sensor checks the filling level after the start.
If the following problems occur, a dialog window appears:
• Filling level too low.
• Filling level too high.
• Filling level cannot be correctly detected.
Abb. 4-7: Checking window
Fig. 4-7: Checking window
If the Calculated volume is larger than the Maximum volume, remove liquid from the vessel.
If the Calculated volume is smaller than the Minimum volume, add liquid to the vessel.
The optical sensor cannot carry out a detection if there is an air bubble in the liquid. Remove the air
bubble. Select Repeat scan to repeat the detection.
Maximum volume
Filling level of the vessel.
Minimum volume
Volume required to remove the set liquid
quantity.
Calculated volume
Volume in the vessel, calculated using vessel
data and the liquid level.
Repeat scan button
Repeat Detect volumes.
Abort button
Aborts the application.
User input button
Manual volume entry.
Accept level and continue button
Accept the displayed calculated volume.
µL input field
Manually select the volume if the User Input
button has been selected.
NOTICE! Dispensing error due to refilling of vessels.
The optical sensor only checks the level of the vessels at the specified location.
Only change the volume of the vessels at the specified location.
Do not change the volume of the vessels at other locations.
- Software manual 1
- Table of contents 3
- 1 Operating instructions 9
- 1.1 Using this manual 9
- 1.3 Symbols used 10
- 1.4 Abbreviations used 11
- 1.5 Glossary 12
- Operating instructions 16
- 2 Product description 17
- 2.1 Features 17
- 2.1.2 Assistants 18
- 3 Operation 19
- 3.1.4 Logging off as a user 20
- 3.2 Initial steps 21
- 3.2.3 File menu 22
- 3.2.4 Status area 23
- Operation 24
- 4.1 Opening an application 25
- 4.2.1 Selecting the device 26
- 4.2.6.1 Entering IDs manually 29
- Abb. 4-7: Checking window 31
- Press the Run button 33
- 4.3 Starting the application 34
- 4.5 Ending the application 35
- 5.1 Displaying protocols 37
- 6.1 Overview 39
- 6.2 Creating an application 39
- 6.2.3 Copying applications 40
- 6.2.4 Saving an application 41
- 6.2.5 Positioning labware 41
- 6.2.5.3 Stacking labware 42
- Abb. 6-5: Properties window 44
- 6.2.8 Defining procedures 45
- 6.3 Commands 47
- 6.3.3 Dilute command 57
- 6.3.4 Pool command 60
- 6.3.6 Comment command 61
- 6.3.7 Exchange command 62
- 6.3.9 Mix command 63
- 6.3.11 Temperature command 65
- 6.3.12 Thermomixer command 66
- 6.3.13 Vacuum command 68
- 6.3.14 Transport command 69
- 6.3.16 Wait command 70
- Abb. 6-25: Wait window 71
- 6.3.17.1 Creating a CSV file 72
- 6.3.17.2 Importing a CSV file 74
- 6.4 Pattern 76
- 6.5 Optical sensor 80
- Abb. 6-34: Properties window 81
- 6.5.2 Detect tips 83
- 7.1 Menu bar and start screen 85
- 7.2.1 Copying applications 86
- 7.2.2 Deleting an application 86
- 7.4.1 Importing applications 87
- 7.4.2 Exporting applications 89
- 8.1 Overview of labware 91
- 8.2 Managing labware 92
- 8.2.3 Delete labware 93
- 8.2.4 Import labware 93
- Abb. 8-4: Imported labware 94
- 8.2.5 Export labware 95
- Abb. 8-8: Creating labware 99
- 8.4 Labware library 104
- 8.5 Labware types in epBlue 105
- 8.5.11 Thermoracks 107
- 8.5.12 Tip Holder 107
- 8.5.13 Thermoadapter 108
- 8.5.14 Thermoblocks 108
- 9.1.1 Starting a simulation 109
- Abb. 9-1: Simulation window 110
- 10.1 ID lists 111
- 10.3 Reading IDs into epBlue 113
- 10.4 Managing ID lists 114
- 10.4.3 Import ID lists 115
- 10.4.4 Export ID lists 116
- 10.4.5 Delete ID lists 116
- English (EN) 118
- 11.1 Overview 119
- 11.2 Levelsensor options 119
- 11.3 Tool interlock 120
- 11.4 Dosing device 121
- 11.5 Gripper 122
- 11.7 Thermomixer 124
- 11.8 Magnetic separation 126
- 11.9 UV lamp 127
- 11.10 HEPA air filter 128
- 12.1.2 epBlue user groups 131
- 12.1.3 User accounts 133
- 12.1.3.1 Overview 133
- 13.1 Data backup 139
- 13.1.3 Restoring the database 141
- 13.2 Changing the device name 142
- 13.3 Print templates 143
- 13.3.1 Create print templates 144
- 13.3.3 Delete print templates 144
- See explanation in the 174
- Set the volume to zero 174
- 15 Ordering information 175
- 15.1 Accessories 175
- Evaluate your manual 180
Relacionado con productos y manuales para Software Eppendorf epBlue with MultiCon
(36 paginas)
(36 paginas)
(36 paginas)
(36 paginas)© 2020, manymanuals.es. Todos los derechos reservados | 0.086 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales